Hybrid flexible adhesive
|
Hybrid |
Feature |
color |
Viscosity (cps) |
Ratio |
Working time |
Fixture time
|
Full Curing time (hour) |
Service temperature |
Elongation at break |
|
Hybird-9040 |
Hybrid, very fast curing, Toughened, humid and vibration resistant |
Straw |
A: 6,000 B: 30,000 |
1:1 |
1-2 min. |
5 min. |
24 |
-40～150°C
|
3.6%
|
|
Hybrid-HA20 |
Withstand severe thermal shock. Good ageing resistance, low moisture absorption, no solvent |
Beige |
A: 100,000 B: 30,000 |
2:1 |
20-25 |
4 hours |
24 |
-40~130ºC |
300% |
General Description
UVALAM Hybrid-9040 is a two component 1:1, general purpose High Viscosity, Cyanoacrylate/epoxy hybrid adhesive.
UVALAM Hybrid-9040 provides a very fast fixture at room temperature.
UVALAM Hybrid-9040 is designed to bond a variety of substrates including metals, most plastics and rubbers.
UVALAM Hybrid-9040 provides good temperature resistance (-40°C～150°C)and moisture resistance.
Typical applications
UVALAM Hybrid-9040 is suitable for applications in high temperature/humidity environments.
The thixotropic nature makes it suitable for applications where good gap filling properties on rough and poorly fitting surfaces are required.
Product characteristics:
|
Chemical Type (Resin/Hardener) |
Cyanoacrylate/epoxy hybrid |
|
Appearance (Resin) |
colorless to straw |
|
Appearance (Hardener) |
Off-white to light yellow |
|
Appearance (Mixture) |
Off-white to slight yellowish |
|
Components |
Two component 2:1 (requires mixing) |
|
Viscosity |
High |
|
Mix Ratio, (by volume) |
Resin : Hardener = 1 : 1 |
|
Cure |
Room temperature cure after mixing |
|
Application |
Bonding |
TYPICAL PROPERTIES OF UNCURED MATERIAL
Resin:
Specific Gravity @ 25 °C: 1.01
Viscosity: 6,000 cps
Hardener:
Specific Gravity @ 25 °C: 1.06
Viscosity: 30,000 cps
Mixed Properties:
Specific Gravity @ 25 °C: 1.0
Viscosity: 10,000 cps
TYPICAL PROPERTIES OF CURED MATERIAL
Cured @ 22 °C for 7 days
Physical Properties:
|
Glass Transition Temperature (Tg) |
88°C |
|
Shore Hardness, Durometer D |
65 |
|
Elongation |
3.6% |
|
Tensile Strength |
81,000 psi |
TYPICAL PERFORMANCE OF CURED MATERIAL -Adhesive Properties
|
Cured 168 hours at 22°C Substrate |
Lap Shear Strength |
|
|
N/mm² |
psi |
|
|
Steel (grit blasted) |
17 |
2,420 |
|
Aluminum (etched) |
13 |
1,900 |
|
Stainless steel |
14 |
1,900 |
|
Polycarbonate |
6.9 |
1,000 |
|
Nitrile |
0.7 |
100 |
|
Wood (Pine) to Steel (grit blasted) |
4.8 |
700 |
|
Epoxy |
9.1 |
1,320 |
|
Polyethylene |
0.5 |
72 |
|
Polypropylene |
0.6 |
87 |
Chemical/Solvent Resistance
Aged under conditions indicated and tested @ 23 °C.
|
|
|
% of the initial strength |
|
|
Environment |
°C |
500 hours |
1000 hours |
|
air |
87 |
160 |
150 |
|
Motor oil |
87 |
160 |
145 |
|
Unleaded gasoline |
87 |
125 |
110 |
|
Water/glycol 50/50 |
87 |
145 |
140 |
|
Salt fog |
23 |
75 |
90 |
|
95%RH |
38 |
110 |
120 |
|
Condensing Humidity |
49 |
95 |
95 |
|
water |
23 |
105 |
90 |
|
Acetone |
23 |
105 |
110 |
|
Isopropanol |
23 |
125 |
125 |
Cartridge packing size:
1:1 dual PP cartridge 50ml;
1:1 dual PP cartridge 400ml.
Storage
Storage Store product in the unopened container in a dry location, Optimal Storage from 2°C to 21°C.
Storage below 2°C or greater than 21°C can adversely affect product properties.
Material removed from containers may be contaminated during use.
Do not return product to the original container.
Shelf Life
This product has a shelf life of 6-9 months in original containers.
📞📞📞
Please contact us for more information on WhatsApp: Http://wa.me/008618850500512